|
|
PDF TND316S Data sheet ( Hoja de datos )
| Número de pieza | TND316S | |
| Descripción | General Purpose Driver | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de TND316S (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
|
No Preview Available !
Ordering number : ENA0422
TND316S
SANYO Semiconductors
DATA SHEET
TND316S
ExPD (Excellent Power Device)
General Purpose Driver for PDP Sustain Pulse Drive, Motor Drive,
Switching Power Supply, and DC / DC Converter Applications
Features
• Inverter buffer.
• Monolithic structure (High voltage CMOS process adopted).
• Withstand voltage of 25V is assured.
• Wide range of operating voltage : 4.5V to 25V.
• Peak output current : 1A.
• Fast switching time (30ns typical at 1000pF load).
• Fully compatible input to TTL / CMOS (VIH=up to 2.6V, at VDD=4.5 to 25V).
• Built-in input pull-down resistance.
Specifications
Absolute Maximum Ratings at Ta=25°C
Parameter
Supply Voltage
Input Voltage
Allowable Power Dissipation
Junction Temperature
Storage Temperature
Symbol
VDD
VIN
PD max
Tj
Tstg
Conditions
Recommended Operating Conditions at Ta=25°C
Parameter
Operating Supply Voltage
Operating Temperature
Symbol
VDD
Topr
Conditions
Electrical Characteristics (AC Characteristics) at Ta=25°C, VDD=18V, VIN=5V
Parameter
Turn-On Rise Time
Turn-Off Fall Time
Delay Time
Symbol
tr
tf
tD1
tD2
CL=1000pF
CL=1000pF
CL=1000pF
CL=1000pF
Conditions
min
Ratings
0 to 25
GND--0.3 to VDD+0.3
0.3
--55 to +150
--55 to +150
Ratings
4.5 to 25
--40 to +125
Ratings
typ
30
30
30
45
max
45
45
45
60
Unit
V
V
W
°C
°C
Unit
V
°C
Unit
ns
ns
ns
ns
Any and all SANYO Semiconductor products described or contained herein do not have specifications
that can handle applications that require extremely high levels of reliability, such as life-support systems,
aircraft's control systems, or other applications whose failure can be reasonably expected to result in
serious physical and/or material damage. Consult with your SANYO Semiconductor representative
nearest you before using any SANYO Semiconductor products described or contained herein in such
applications.
SANYO Semiconductor assumes no responsibility for equipment failures that result from using products
at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor
products described or contained herein.
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
D0606IP TI IM TB-00001536 No. A0422-1/5
1 page  
TND316S
Specifications of any and all SANYO Semiconductor products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state,
and are not guarantees of the performance, characteristics, and functions of the described products
as mounted in the customer's products or equipment. To verify symptoms and states that cannot be
evaluated in an independent device, the customer should always evaluate and test devices mounted
in the customer's products or equipment.
SANYO Semiconductor Co., Ltd. strives to supply high-quality high-reliability products. However, any
and all semiconductor products fail with some probability. It is possible that these probabilistic failures
could give rise to accidents or events that could endanger human lives, that could give rise to smoke or
fire, or that could cause damage to other property. When designing equipment, adopt safety measures
so that these kinds of accidents or events cannot occur. Such measures include but are not limited to
protective circuits and error prevention circuits for safe design, redundant design, and structural design.
In the event that any or all SANYO Semiconductor products (including technical data,services) described
or contained herein are controlled under any of applicable local export control laws and regulations, such
products must not be exported without obtaining the export license from the authorities concerned in
accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic
or mechanical, including photocopying and recording, or any information storage or retrieval system,
or otherwise, without the prior written permission of SANYO Semiconductor Co., Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification"
for the SANYO Semiconductor product that you intend to use.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not
guaranteed for volume production. SANYO Semiconductor believes information herein is accurate
and reliable, but no guarantees are made or implied regarding its use or any infringements of
intellectual property rights or other rights of third parties.
This catalog provides information as of December, 2006. Specifications and information herein are subject
to change without notice.
PS No. A0422-5/5
5 Page | ||
| Páginas | Total 5 Páginas | |
| PDF Descargar | [ Datasheet TND316S.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| TND316S | Excellent Power Device |  ON Semiconductor |
| TND316S | General Purpose Driver | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |