DataSheet.es    


PDF DSC2311 Data sheet ( Hoja de datos )

Número de pieza DSC2311
Descripción Configurable Two Output Clock Generator
Fabricantes Micrel Semiconductor 
Logotipo Micrel Semiconductor Logotipo



Hay una vista previa y un enlace de descarga de DSC2311 (archivo pdf) en la parte inferior de esta página.


Total 5 Páginas

No Preview Available ! DSC2311 Hoja de datos, Descripción, Manual

DSC2311
Crystal-less™ Configurable Two Output Clock Generator
General Description
The DSC2311 is a crystal-less clock
generator that is factory configurable to
simultaneously output two separate
frequencies from 2.3 to 170 MHz. The clock
generator uses proven silicon MEMS
technology to provide low jitter and high
frequency stability across a wide range of
supply voltages and temperatures. By
eliminating the external quartz crystal,
crystal-less clock generators significantly
enhance reliability and accelerate product
development, while meeting stringent clock
performance criteria for a variety of
consumer electronics, communications, and
storage applications.
DSC2311 has an Output Enable / Disable
feature allowing it to disable the outputs
when OE is low. The device is available in a
space saving 6 pin 2.5 x 2.0 mm crystal-
less TDFN package that uses only a single
external bypass capacitor. This requires a
PCB footprint equivalent to that of a 1.0 x
1.0 mm crystal-based clock generator.
Features
Two Simultaneous CMOS Outputs:
o Output 1 Range: 2.3 to 170 MHz
o Output 2 Range: 2.3 to 170 MHz
Low RMS Phase Jitter: <1 ps (typ)
High Stability: ±25, ±50 ppm
Wide Temperature Range
o Automotive: -55° to 125° C
o Ext. Industrial: -40° to 105° C
o Industrial: -40° to 85° C
o Ext. commercial: -20° to 70° C
High Supply Noise Rejection: -50 dBc
High Shock & Vibration Immunity
o Qualified to MIL-STD-883
High Reliability
o 20x higher MTBF than crystal-based
clock generator designs
Supply Range of 2.25 to 3.6 V
Short Lead Times: 2 Weeks
Lead Free & RoHS Compliant
Block Diagram
Control Circuitry
MEMS
PLL
OE
Output
Control
and
Divider
Applications
Consumer Electronics
Camera and Imaging Modules
Home Automation
Industrial and Power Conversion
Fout1 Mobile Communications, Internet,
and Sensor Devices
Solid State, Hard Drive, and
Fout2
Flash Drive Storage
_____________________________________________________________________________________________________________________________ _________________
DSC2311
Page 1
MK-QB-P-D-130103-04

1 page




DSC2311 pdf
DSC2311
Crystal-lessConfigurable Two Output Clock Generator
Ordering Information
DSC2311 K I 2 - R0001 T
Package
K: 2520 QFN package
Temp Range
E: -20 to 70
I: -40 to 85
L: -40 to 105
M: -55 to 125
Stability
1: ±50ppm
2: ±25ppm
Packing
T: Tape & Reel
: Tube
Frequency Code
Rxxxx: Custom
Output Clock Frequencies
Output frequencies are factory configured to individual customer and product requirements, subject
to output control and divider limitations. Contact sales with your custom frequency needs.
Frequency Code
Fout1 MHz
Fout2 MHz
R0001
127 127
R0002
25 125
Disclaimer:
Micrel makes no representations or warranties with respect to the accuracy or completeness of the information furnished in this data sheet. This information
is not intended as a warranty and Micrel does not assume responsibility for its use. Micrel reserves the right to change circuitry, specifications and
descriptions at any time without notice. No license, whether express, implied, arising by estoppel or otherwise, to any intellectual property rights is granted
by this document. Except as provided in Micrel’s terms and conditions of sale for such products, Micrel assumes no liability whatsoever, and Micrel disclaims
any express or implied warranty relating to the sale and/or use of Micrel products including liability or warranties relating to fitness for a particular purpose,
merchantability, or infringement of any patent, copyright or other intellectual property right.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the
body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s use or
sale of Micrel Products for use in life support appliances, devices or systems is a Purchaser’s own risk and Purchaser agrees to fully indemnify Micrel for any
damages resulting from such use or sale.
MICREL, Inc.
2180 Fortune Drive,
San Jose, California
95131
USA
Phone: +1 (408) 944-0800
Fax: +1 (408) 474-1000 Email: [email protected]
www.micrel.com
_____________________________________________________________________________________________________________________________ _________________
DSC2311
Page 5
MK-QB-P-D-130103-04

5 Page










PáginasTotal 5 Páginas
PDF Descargar[ Datasheet DSC2311.PDF ]




Hoja de datos destacado

Número de piezaDescripciónFabricantes
DSC2311Configurable Two-Output Clock GeneratorMicrochip
Microchip
DSC2311Configurable Two Output Clock GeneratorMicrel Semiconductor
Micrel Semiconductor

Número de piezaDescripciónFabricantes
SLA6805M

High Voltage 3 phase Motor Driver IC.

Sanken
Sanken
SDC1742

12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters.

Analog Devices
Analog Devices


DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares,
permitiéndote verlos en linea o descargarlos en PDF.


DataSheet.es    |   2020   |  Privacy Policy  |  Contacto  |  Buscar