Datasheet.kr   

LZ34C10 데이터시트 PDF




Sharp Electrionic Components에서 제조한 전자 부품 LZ34C10은 전자 산업 및 응용 분야에서
광범위하게 사용되는 반도체 소자입니다.


PDF 형식의 LZ34C10 자료 제공

부품번호 LZ34C10 기능
기능 1/4-type Color CMOS Image Sensor with 110 k Pixels
제조업체 Sharp Electrionic Components
로고 Sharp Electrionic Components 로고


LZ34C10 데이터시트 를 다운로드하여 반도체의 전기적 특성과 매개변수에 대해 알아보세요.



전체 12 페이지수

미리보기를 사용할 수 없습니다

LZ34C10 데이터시트, 핀배열, 회로
LZ34C10
LZ34C10
1/4-type Color CMOS Image Sensor with
110 k Pixels
DESCRIPTION
The LZ34C10 is a 1/4-type (4.5 mm) solid-state
color image sensor that consists of PN photo-
diodes and CMOS (Complementary Metal Oxide
Semi-conductor) devices. The sensor further
includes a timing generator (TG), a correlated
double sampling (CDS) circuit, an auto gain control
(AGC) circuit and an analog-to-digital converter
(ADC) circuit. With approximately 110 000 pixels
(393 horizontal x 299 vertical), the sensor provides
a stable digital color image with extremely low
power consumption.
FEATURES
• Progressive scan
• Square pixel
• Compatible with CIF standard
• Number of effective pixels : 367 (H) x 291 (V)
• Number of optical black pixels
– Horizontal : 13 front and 13 rear
– Vertical : 4 front and 4 rear
• Pixel pitch : 9.4 µm (H) x 9.4 µm (V)
• R, G, and B primary color mosaic filters
• Image inversion function (horizontally and/or
vertically)
• Power save mode
• Analog output and 8-bit digital output
• Variable gain control (3 to 30 dB)
• Variable electronic shutter (1/30 to 1/10 000 s)
• Single +3.0 V power supply
• Package : 36-pin WLCC* (WLCC036-N-R625)
* Window Leadless Chip Carrier
PIN CONNECTIONS
36-PIN WLCC
TOP VIEW
REFIN
AGCSET
BIAS3
AGCOUT
AGND
AVDD
OFS
ADL
DAL
DAH
AGND
DGND
1
2
3
4
5
6
7
8
9
10
11
12
30 BIAS2
29 NC
28 SCLK
27 SDI
26 VD
25 HD
24 CLK
23 D7
22 D6
21 D5
20 D4
19 D3
(WLCC036-N-R625)
PRECAUTIONS
• The exit pupil position of lens should be more
than 15 mm from the top surface of the CMOS
image sensor.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in
catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1




LZ34C10 pdf, 반도체, 판매, 대치품
ABSOLUTE MAXIMUM RATINGS
PARAMETER
SYMBOL
Power supply voltage
VDD
Input signal voltage
VØ
Storage temperature
TSTG
(TA = +25 ˚C)
RATING
UNIT
–0.3 to +4.3
V
–0.3 to VDD + 0.3
V
–40 to +80
˚C
RECOMMENDED OPERATING CONDITIONS
PARAMETER
SYMBOL MIN. TYP. MAX. UNIT
Power supply voltage
Operating temperature
VDD
TOPR
2.7 3.0 3.3
–20 +25 +60
V
˚C
Oscillation frequency
LOW level
Digital input voltage
HIGH level
Analog input voltage
fCK 9.0 MHz
VØL 0
0.2VDD V
VØH 0.8VDD
VDD
V
(Connect to pin
through a capacitor)
Analog bias voltage
(Connect to GND
through a capacitor)
NOTES :
1. Applied to input pins HD, VD, SDI and SCLK.
2. Applied to input pins SIGIN and REFIN. Do not connect to DC directly.
3. Applied to pins BIAS1, BIAS2, BIAS3, OFS, ADL, DAL, DAH, CLP1 and CLP2.
Do not connect to GND directly.
NOTE
1
2
3
LZ34C10
4

4페이지










LZ34C10 전자부품, 판매, 대치품
LZ34C10
TIMING CHART
HORIZONTAL PULSE TIMING
HD
CLK
906 910
01 4 8 12 16 20 24 28 32 36 40 44 48 52 56 60 64 68 72 76 80 84 889092
ADOUT
(D0-D7)
Normal
361 363
365
367OBB ππππ OBBOBA πππππ OBA
Mirror
7 5 3 1 OBB ππππ OBBOBA πππππ OBA
HD
CLK
104 108 112 116 120 124 128 132 136 140 144 148 152 156 160 164 168 172 176 180 184 188 192 196 200
ADOUT Normal
(D0-D7)
Mirror
OBA OBAOBB ππππ OBB 2 4 6 8 10
OBA OBAOBB ππππ OBB 366 364 362 360 358
• The rising edge of the HD pulse must be between two rising edges of CLK (0) and CLK (1).
• The falling edge of the HD pulse must be between two rising edges of CLK (78) and CLK (79).
PHASE RELATIONS BETWEEN DIGITAL OUTPUT (ADOUT) AND CLOCK (CLK)
CLK
ADOUT
(D0-D7)
VD
HD
SYMBOL MIN. TYP. MAX. UNIT
∆t
∆t 0 15 40 ns
VERTICAL PULSE TIMING
SDI, SCLK
Forbidden Period
328 329 330 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39
Normal
ADOUT
288 289 290 291 OB OB OB OB
(D0-D7)
Mirror
4 3 2 1 OB OB OB OB
• The rising edge and falling edge of the VD pulse must be in high period of the HD pulses.
OB OB
OB OB
D0
SDI
AGC
SERIAL DATA TIMING (SDI, SCLK)
Offset
Shutter
D10 D20
D30
D38
SCLK
• Data in SDI are taken at the rising edge of SCLK.
• Clock frequency of SCLK should be 1/16 of that of CLK.
• Do not insert the SDI and SCLK pulses between 36H* and 37H*. Refer to "VERTICAL PULSE TIMING".
• Refer to "SERIAL DATA INPUTS" for the contents of serial data from D0 to D38.
* It means ordinal number of the HD pulse.
7

7페이지


구       성 총 12 페이지수
다운로드[ LZ34C10.PDF 데이터시트 ]

당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는

포괄적인 데이터시트를 제공합니다.


구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한
광범위한 전력 반도체를 판매합니다.

전력 반도체 전문업체

상호 : 아이지 인터내셔날

사이트 방문 :     [ 홈페이지 ]     [ 블로그 1 ]     [ 블로그 2 ]



관련 데이터시트

부품번호상세설명 및 기능제조사
LZ34C10

1/4-type Color CMOS Image Sensor with 110 k Pixels

Sharp Electrionic Components
Sharp Electrionic Components

DataSheet.kr       |      2020   |     연락처      |     링크모음      |      검색     |      사이트맵