|
|
PDF KYL-816 Data sheet ( Hoja de datos )
| Número de pieza | KYL-816 | |
| Descripción | Wireless Analog Acquisition Module | |
| Fabricantes | Shenzhen KYL Communication | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de KYL-816 (archivo pdf) en la parte inferior de esta página. Total 7 Páginas | ||
|
No Preview Available !
www.DataSheet4U.net
Shenzhen KYL Communication Equipment Co., Ltd
KYL-816 Analog Wireless Acquisition module Use Manual
Shenzhen KYL Communication Equipment Co., Ltd
Address: Unit 5-7, Building3, Huangdu Square, South of Exhibition Center, Yitian
Road, Futian District, Shenzhen Guangdong China
Tel: +0086-755-83410815
Fax: +0086-755-83408785
Skype：lxmlosia
Yahoo messenger: [email protected]
MSN: [email protected]
Website: http://www.rf-data.com
Fax: +0086-755-83408785 [email protected] www.rf-data.com
1 page  
Shenzhen KYL Communication Equipment Co., Ltd
1）Module address: from 000 to 255;
2）Channel: total eight channels, each channel have different frequency;
3）Transmission interval: it will be in effect only for the module under the point to
point transmission mode. The minimum interval will be different from the baud
rate of the module. When it set as “000”,the module work at the subordinate mode
and will receive or output data.
3、Use of the software
1）Connect the module with the PC and open the software of KYL-80X, then choose
the right port.
2）Electrify, if connect success, the software will show “ read success”. Then “read
ID”, read success, then can change the parameter.
Note:
1）When set or read parameter, first need input the appointed ID that is the current
module address; also can know the current module address by “read ID”, the
“ write ID” command can change the current module address.
2 ） When set the channel, it can’t exceed the max number channel for eight
channels. And the two module will be set the some channel, or they will not
communicate.
3）Also can change the parameter by wireless. Connect the wireless data module
with the PC by UART port(not the UART port of the KYL-816),then can change
the parameter of the KYL-816.
4）Under the point to point mode, many double equipment work at the same time,
different double equipment should be set different channel.
Fax: +0086-755-83408785 [email protected] www.rf-data.com
5 Page | ||
| Páginas | Total 7 Páginas | |
| PDF Descargar | [ Datasheet KYL-816.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| KYL-812 | wireless ON-OFF input and output module | Shenzhen KYL Communication |
| KYL-813 | 2-way I/O module | Shenzhen KYL Communication |
| KYL-816 | Wireless Analog Acquisition Module | Shenzhen KYL Communication |
| KYL-818 | 8-way wireless ON-OFF Module | Shenzhen KYL Communication |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |