|
|
Número de pieza | APA102 | |
Descripción | LED Chip | |
Fabricantes | Greeled Electronic | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de APA102 (archivo pdf) en la parte inferior de esta página. Total 5 Páginas | ||
No Preview Available ! ● APA102 chip built in SMD5050
www.gree-leds.com
Features and Benefits
z Intelligent reverse connect protection, the power supply reverse connection does not damage the IC.
z The control circuit and the LED share the only power source.
z Control circuit and RGB chip are integrated in a package of 5050 components, form a complete control of pixel
point.
z Built-in signal reshaping circuit, after wave reshaping to the next driver, ensure wave-form distortion not
accumulate.
z Built-in electric reset circuit and power lost reset circuit.
z Each pixel of the three primary color can achieve 256 brightness display, completed 16777216 color full color
display, and scan frequency not less than 400Hz/s.
z Cascading port transmission signal by (DAT CLK) two line.
z Any two point the distance less than 5m transmission signal without any increase circuit.
z When the refresh rate is 30fps, cascade number are not more than 512 pixels
z Send data at speeds of 800Kbps or 1200Kbps
Greeled Electronic Ltdz The color of the light were highly consistent, cost-effective..
General description
APA102 is a intelligent control LED light source that the control circuit and RGB chip are integrated in a
package of 5050 components. It internal include 3 groups shift register and Self-detection signdecoder circuit.
Also include a 4.5V voltage regulator part and continuous oscillator effectively ensuring the pixel point light colo
r height consistent.
The data transfer protocol use two line decoder mode. After the pixel power-on reset, the DIN port receive
data from controller after decorder , the first pixel collect initial 24bit data then sent to the internal data regi
ster, the other data which reshaping by the internal signal decorder circuit sent to the next cascade pixel thr
ough the DO CO port. After transmission for each pixel.
LED with low driving voltage, environmental protection and energy saving, high brightness, scattering angl
e is large, good consistency, low power, long life and other advantages. The control chip integrated in LED
above becoming more simple circuit, small volume, convenient installation.
Application:
●Led bill board, Led sign
●Led display, landscape lighting
●Building edge projects
Greeled Electronic Ltd
1 page www.gree-leds.com
Application circuit:
Greeled Electronic Ltd
Note:
1. Don’t open the moisture proof bag before you ready use
2. The led should be kept at 30℃ or less and 60%RH or less before opening package.
3. keeping led over 3 months or reuse led that is kept in open-package, Then please eliminate humid.
Pls use the constant-temperature oven to toast the led at 60℃for 12Hours. or peel led from roll and toast it at 120℃
for 2hours.
4. the temperature of iron be lower 300℃ and soldering within 3sec, Per solder-pad is observed.
Greeled Electronic Ltd
5 Page |
Páginas | Total 5 Páginas | |
PDF Descargar | [ Datasheet APA102.PDF ] |
Número de pieza | Descripción | Fabricantes |
APA100 | 1200 Watts | Astec America |
APA1000 | (APAxxx) 2nd Generation Reprogrammable Flash Fpgas | Actel Corporation |
APA102 | LED Chip | Greeled Electronic |
APA102 | 3-color RGB Diming control IC | led color opto electronic |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |