|
|
|
부품번호 | ADNS-2710 기능 |
|
|
기능 | Single Chip USB Optical Mouse Sensor | ||
제조업체 | PixArt | ||
로고 | |||
전체 30 페이지수
Data Sheet
ADNS-2710
Single Chip USB Optical Mouse Sensor
Description
The ADNS-2710 is a compact, one chip USB optical mouse
sensor designed for implementation of a non-mechanical
tracking engine in computer mice.
It is based on optical navigation technology that measures
changes in position by optically acquiring sequential
surface images (frames) and mathematically determining
the direction and magnitude of movement.
The sensor is in an 8-pin optical package that is designed
to be used with the ADNS-5110-001 trim lensPS
"%/4MFOTBOEUIF)-.1&(&3FE-&%
Together, these parts provide a complete BOEDPNQBDU
mouse sensor. There are no moving parts BOEQSFDJTJPO
optical alignment is not required, thus faciliUBUJOH
high volume assembly.
The output format is USB. This device meets HID Revision
1.11 specification and is compatible with USB Revision 2.0
specification.
Frame rate is varied internally to the sensor to achieve
tracking and speed performance, eliminating the need for
the use of many registers.
Default resolution is specified as 1000 counts per inch,
with rates of motion up to 30 inches per second.
A complete mouse can be built with the addition of a PC
board, switches and Z-wheel, plastic case and cable.
NOTE: ADNS-2710 will be referred to as "sensor", ADNS-5110-
001 as " trim lens" and HLMP-EG3E as "LED" hereafter.
Features
One chip USB mouse sensor
USB 2.0 Low Speed Compliance
12 bits USB motion data reporting
Meets HID Revision 1.11
Single 5.0 volts power supply
High speed motion detection at 30 inches per second
(ips) and acceleration up to 8 g
Input buttons: 3 buttons
Z-Wheel interface for vertical scroll
Integrated oscillator
Integrated USB D- pull-up resistor
Product string is set to “USB Optical Mouse”
On-chip OTP memory for device configuration
flexibility without any external software driver:
– Programmable resolution from 500 to 1250 counts
per inch (cpi) with 250 cpi step.
– Programmable sensor orientation
– Programmable VID and PID.
Applications
Corded optical mice
Trackballs
Integrated input devices
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: [email protected]
PixArt Imaging Inc.
TOP VIEW
ADNS-2710 Single Chip USB Optical Mouse Sensor
33.45
1.317
Pin # 1
A
A
CROSS SECTION SIDEVIEW
SENSOR LENS LED
0.05 Gaps between sensor
0.002 package and top of PCB
PCB
LED CLIP
ALIGNMENT POST
(Optional)
10.60 2.40 Bottom of lens
0.417 0.094 flange to surface
7.45 Top of PCB to surface
0.293
NOTE: Dimensions in mm/Inches
Important Note: Pin 1 of sensor should be located nearest to the LED
Figure 4. 2D Assembly drawing of sensor (Top and Side View)
SENSOR
LENS
BASE PLATE
NAVIGATION SURFACE
1.85 SURFACE
0.073
LENS REFERENCE PLANE
Note:
A - Distance from object surface to lens reference plane
B - Distance from object surface to sensor reference plane
Figure 5. Distance from lens reference plane to tracking surface (Z)
All rights strictly reserved any portion in this paper shall not be reproduced, copied or transformed to any other forms without permission.
PixArt Imaging Inc.
E-mail: [email protected]
4
4페이지 7페이지 | |||
구 성 | 총 30 페이지수 | ||
다운로드 | [ ADNS-2710.PDF 데이터시트 ] |
당사 플랫폼은 키워드, 제품 이름 또는 부품 번호를 사용하여 검색할 수 있는 |
구매 문의 | 일반 IC 문의 : 샘플 및 소량 구매 ----------------------------------------------------------------------- IGBT, TR 모듈, SCR 및 다이오드 모듈을 포함한 광범위한 전력 반도체를 판매합니다. 전력 반도체 전문업체 상호 : 아이지 인터내셔날 사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ] |
부품번호 | 상세설명 및 기능 | 제조사 |
ADNS-2710 | Single Chip USB Optical Mouse Sensor | PixArt |
DataSheet.kr | 2020 | 연락처 | 링크모음 | 검색 | 사이트맵 |