Datasheet.kr   

74VHC08-Q100 PDF 데이터시트 ( Data , Function )

부품번호 74VHC08-Q100 기능
기능 Quad 2-input AND gate
제조업체 NXP Semiconductors
로고 NXP Semiconductors 로고 


이 페이지 하단에 미리보기 및 74VHC08-Q100 다운로드 (pdf 파일) 링크가 있습니다.




전체 15 페이지

No Preview Available !

74VHC08-Q100 데이터시트, 핀배열, 회로
74VHC08-Q100;
74VHCT08-Q100
Quad 2-input AND gate
Rev. 1 — 20 December 2013
Product data sheet
1. General description
The 74VHC08-Q100; 74VHCT08-Q100 are high-speed Si-gate CMOS devices and are
pin compatible with Low-power Schottky TTL (LSTTL). They are specified in compliance
with JEDEC standard JESD7-A.
The 74VHC08-Q100; 74VHCT08-Q100 provide the quad 2-input AND function.
This product has been qualified to the Automotive Electronics Council (AEC) standard
Q100 (Grade 1) and is suitable for use in automotive applications.
2. Features and benefits
Automotive product qualification in accordance with AEC-Q100 (Grade 1)
Specified from 40 C to +85 C and from 40 C to +125 C
Balanced propagation delays
All inputs have a Schmitt-trigger action
Inputs accept voltages higher than VCC
Input levels:
The 74VHC08-Q100 operates with CMOS logic levels
The 74VHCT08-Q100 operates with TTL logic levels
ESD protection:
MIL-STD-883, method 3015 exceeds 2000 V
HBM JESD22-A114F exceeds 2000 V
MM JESD22-A115-A exceeds 200 V (C = 200 pf, R = 0 )
Multiple package options




74VHC08-Q100 pdf, 반도체, 판매, 대치품
NXP Semiconductors
74VHC08-Q100; 74VHCT08-Q100
Quad 2-input AND gate
6. Functional description
Table 3.
Input
nA
L
X
H
Function selection[1]
nB
X
L
H
[1] H = HIGH voltage level; L = LOW voltage level; X = don’t care
7. Limiting values
Output
nY
L
L
H
Table 4. Limiting values
In accordance with the Absolute Maximum Rating System (IEC 60134). Voltages are referenced to GND (ground = 0 V).
Symbol
Parameter
Conditions
Min Max Unit
VCC
VI
IIK
IOK
IO
ICC
IGND
Tstg
Ptot
supply voltage
input voltage
input clamping current
output clamping current
output current
supply current
ground current
storage temperature
total power dissipation
SO14 package
VI < 0.5 V
VO < 0.5 V or VO > VCC + 0.5 V
VO = 0.5 V to (VCC + 0.5 V)
Tamb = 40 C to +125 C
0.5
0.5
[1] 20
[1] -
-
-
75
65
+7.0
+7.0
-
20
25
75
-
+150
V
V
mA
mA
mA
mA
mA
C
[2] -
500 mW
TSSOP14 package
[3] -
500 mW
DHVQFN14 package
[4] -
500 mW
[1] The input and output voltage ratings may be exceeded if the input and output current ratings are observed.
[2] Ptot derates linearly with 8 mW/K above 70 C.
[3] Ptot derates linearly with 5.5 mW/K above 60 C.
[4] Ptot derates linearly with 4.5 mW/K above 60 C.
74VHC_VHCT08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2013
© NXP B.V. 2013. All rights reserved.
4 of 15

4페이지










74VHC08-Q100 전자부품, 판매, 대치품
NXP Semiconductors
74VHC08-Q100; 74VHCT08-Q100
Quad 2-input AND gate
Table 7. Dynamic characteristics …continued
GND = 0 V; For test circuit, see Figure 7.
Symbol Parameter Conditions
25 C
40 C to +85 C 40 C to +125 C Unit
Min Typ[1] Max Min
Max
Min
Max
For type 74VHCT08-Q100
tpd propagation nA, nB to nY; see Figure 6 [2]
delay
VCC = 4.5 V to 5.5 V
CL = 15 pF
- 3.2 6.9 1.0
8.0
1.0
9.0 ns
CL = 50 pF
- 4.2 7.9 1.0 9.0 1.0 10.0 ns
CPD power
CL = 50 pF; fi = 1 MHz;
[3] - 12.0 -
-
-
-
- pF
dissipation VI = GND to VCC
capacitance
[1] Typical values are measured at nominal supply voltage (VCC = 3.3 V and VCC = 5.0 V).
[2] tpd is the same as tPLH and tPHL.
[3] CPD is used to determine the dynamic power dissipation (PD in W).
PD = CPD VCC2 fi N + (CL VCC2 fo) where:
fi = input frequency in MHz, fo = output frequency in MHz
CL = output load capacitance in pF
VCC = supply voltage in Volts
N = number of inputs switching
(CL VCC2 fo) = sum of the outputs.
11. Waveforms
VI
nA, nB input
GND
VOH
nY output
VOL
VM
t PHL
VM
t PLH
mna224
Fig 6.
Measurement points are given in Table 8.
VOL and VOH are typical voltage output levels that occur with the output load.
The input (nA, nB) to output (nY) propagation delays
Table 8. Measurement points
Type
74VHC08-Q100
74VHCT08-Q100
Input
VM
0.5VCC
1.5 V
Output
VM
0.5VCC
0.5VCC
74VHC_VHCT08_Q100
Product data sheet
All information provided in this document is subject to legal disclaimers.
Rev. 1 — 20 December 2013
© NXP B.V. 2013. All rights reserved.
7 of 15

7페이지


구       성총 15 페이지
다운로드[ 74VHC08-Q100.PDF 데이터시트 ]


 
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

상호 : 아이지 인터내셔날

사이트 방문 : [ 홈페이지 ] [ 블로그 1 ] [ 블로그 2 ]


 

관련 데이터시트

부품번호상세설명 및 기능제조사
74VHC08-Q100

Quad 2-input AND gate

NXP Semiconductors
NXP Semiconductors

DataSheet.kr    |   2020   |  연락처   |  링크모음   |   검색  |   사이트맵