Datasheet.kr   

25P10A PDF 데이터시트 : 부품 기능 및 핀배열

부품번호 25P10A
기능 1Mb 3V Serial Flash Embedded Memory
제조업체 Micron
로고 Micron 로고 


전체 30 페이지

		

No Preview Available !

25P10A 데이터시트, 핀배열, 회로
M25P10A Serial Flash Embedded Memory
Features
M25P10A 1Mb 3V Serial Flash Embedded
Memory
Features
• SPI bus-compatible serial interface
• 1Mb Flash memory
• 50 MHz clock frequency (maximum)
• 2.3V to 3.6V single supply voltage
• Page program (up to 256 bytes) in 1.4ms (TYP)
• Erase capability
– Sector erase: 256Kb in 0.65s (TYP)
– Bulk erase: 1Mb in 1.7s (TYP)
• Deep power-down: 1µA (TYP)
• Electronic signature
– JEDEC-standard 2-byte signature (2011h)
– RES command, 1-byte signature (10h) for back-
ward compatibility
• More than 20 years data retention
• Automotive-certified parts available
• Packages (RoHS-compliant)
– SO8N (MN) 150 mils
– VFQFPN8 (MP) MLP8 6mm x 5mm
– UFDFN8 (MB) 2mm x 3mm
PDF: 09005aef8456656b
m25p10A.pdf - Rev. B 05/14 EN
1 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.
Products and specifications discussed herein are subject to change by Micron without notice.




25P10A pdf, 반도체, 판매, 대치품
M25P10A Serial Flash Embedded Memory
Features
List of Tables
Table 1: Signal Names ...................................................................................................................................... 5
Table 2: Signal Descriptions ............................................................................................................................. 7
Table 3: Protected Area Sizes .......................................................................................................................... 11
Table 4: Sectors 3:0 ........................................................................................................................................ 14
Table 5: Command Set Codes ........................................................................................................................ 16
Table 6: READ IDENTIFICATION Data Out Sequence ..................................................................................... 19
Table 7: Status Register Protection Modes ...................................................................................................... 23
Table 8: Power-Up Timing and VWI Threshold ................................................................................................. 34
Table 9: Absolute Maximum Ratings .............................................................................................................. 35
Table 10: Operating Conditions ...................................................................................................................... 35
Table 11: Data Retention and Endurance ........................................................................................................ 35
Table 12: DC Current Specifications ............................................................................................................... 36
Table 13: DC Voltage Specifications ................................................................................................................ 36
Table 14: AC Measurement Conditions ........................................................................................................... 37
Table 15: Capacitance .................................................................................................................................... 37
Table 16: AC Specifications 40 MHz ................................................................................................................ 38
Table 17: AC Specifications 50 MHz ................................................................................................................ 39
Table 18: Instruction Times ........................................................................................................................... 40
Table 19: Part Number Information Scheme ................................................................................................... 46
Table 20: Part Number Information Scheme ................................................................................................... 47
PDF: 09005aef8456656b
m25p10A.pdf - Rev. B 05/14 EN
4 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.

4페이지










25P10A 전자부품, 판매, 대치품
Signal Descriptions
M25P10A Serial Flash Embedded Memory
Signal Descriptions
Table 2: Signal Descriptions
Signal
DQ1
DQ0
C
S#
HOLD#
W#
VCC
VSS
Type
Output
Input
Input
Input
Input
Input
Power
Ground
Description
Serial data: The DQ1 output signal is used to transfer data serially out of the device.
Data is shifted out on the falling edge of the serial clock (C).
Serial data: The DQ0 input signal is used to transfer data serially into the device. It
receives commands, addresses, and the data to be programmed. Values are latched on
the rising edge of the serial clock (C).
Clock: The C input signal provides the timing of the serial interface. Commands, ad-
dresses, or data present at serial data input (DQ0) is latched on the rising edge of the
serial clock (C). Data on DQ1 changes after the falling edge of C.
Chip select: When the S# input signal is HIGH, the device is deselected and DQ1 is at
HIGH impedance. Unless an internal PROGRAM, ERASE, or WRITE STATUS REGISTER cy-
cle is in progress, the device will be in the standby power mode (not the DEEP POWER-
DOWN mode). Driving S# LOW enables the device, placing it in the active power
mode. After power-up, a falling edge on S# is required prior to the start of any com-
mand.
Hold: The HOLD# signal is used to pause any serial communications with the device
without deselecting the device. During the hold condition, DQ1 is High-Z. DQ0 and C
are "Don’t Care." To start the hold condition, the device must be selected, with S#
driven LOW.
Write protect: The W# input signal is used to freeze the size of the area of memory
that is protected against program or erase commands as specified by the values in
BP1, and BP0 bits of the Status Register.
Device core power supply: Source voltage.
Ground: Reference for the VCC supply voltage.
PDF: 09005aef8456656b
m25p10A.pdf - Rev. B 05/14 EN
7 Micron Technology, Inc. reserves the right to change products or specifications without notice.
© 2013 Micron Technology, Inc. All rights reserved.

7페이지



구       성총 30 페이지
다운로드[ 25P10A.PDF 데이터시트 ]
구매 문의
일반 IC 문의 : 샘플 및 소량 구매
-----------------------------------------------------------------------

전력 반도체 판매 ( IGBT, TR 모듈, SCR, 다이오드 모듈 )

휴대전화 : 010-3582-2743


상호 : 아이지 인터내셔날

전화번호 : 051-319-2877, [ 홈페이지 ]



링크공유

링크 :

관련 데이터시트

부품번호상세설명 및 기능제조사
25P10

1 Mbit Low Voltage Paged Flash Memory

STMicroelectronics
STMicroelectronics
25P10A

1Mb 3V Serial Flash Embedded Memory

Micron
Micron

추천 데이터시트

부품번호상세설명 및 기능제조사
CQ1565RT

FSCQ1565RT, Green Mode Fairchild Power Switch. In general, a Quasi-Resonant Converter (QRC) shows lower EMI and higher power conversion efficiency compared to conventional hard-switched converter with a fixed switching frequency.

Fairchild
Fairchild
KF16N25D

MOSFET의 기능은 N Channel MOS Field effect transistor입니다. This planar stripe MOSFET has better characteristics, such as fast switching time, low on resistance, low gate charge and excellent avalanche characteristics. It is mainly suitable for DC/DC Converters and switching mode power supplies.( Vdss=250V, Id=13A )

KEC
KEC

DataSheet.kr    |   2018   |  연락처   |  링크모음   |   검색  |   사이트맵