|
|
PDF STK433-040N-E Data sheet ( Hoja de datos )
| Número de pieza | STK433-040N-E | |
| Descripción | 2channel class-AB Audio Power IC | |
| Fabricantes | Sanyo | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STK433-040N-E (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
Ordering number : ENA2101
STK433-040N-E
Thick-Film Hybrid IC
2channel class-AB Audio Power IC
40W+40W
Overview
The STK433-040N-E is a hybrid IC designed to be used in 40W × 2ch class AB audio power amplifiers.
Application
• Audio Power amplifiers
Features
• Pin-to-pin compatible outputs ranging from 40W to 150W.
• Miniature package.
• Output load impedance: RL = 6Ω recommended.
• Allowable load shorted time: 0.3 second
• Allows the use of predesigned applications for standby and mute circuit.
Series model
Output1 (10%/1kHz)
Output2 (0.4%/20Hz to 20kHz)
Max. rating VCC (quiescent)
Max. rating VCC (6Ω)
Recommended operating VCC (6Ω)
Dimensions (excluding pin height)
STK433-040N-E
STK433-060N-E
40W × 2ch
50W × 2ch
25W × 2ch
35W × 2ch
±38V
±46V
±36V
±40V
±24V
±27V
47.0mm×25.6mm×9.0mm
STK433-130N-E
150W × 2ch
100W × 2ch
±71.5V
±63V
±44V
67.0mm×25.6mm×9.0mm
STK433-330N-E
150W × 3ch
100W × 3ch
±71.5V
±63V
±44V
64.0mm×36.6mm×9.0mm
Output1 (10%/1kHz)
Output2 (0.4%/20Hz to 20kHz)
Max. rating VCC (quiescent)
Max. rating VCC (6Ω)
Recommended operating VCC (6Ω)
Dimensions (excluding pin height)
STK433-840N-E
STK433-870N-E
40W × 4ch
60W × 4ch
25W × 4ch
40W × 4ch
±38V
±50V
±36V
±44V
±25V
±30V
64.0mm×31.1mm×9.0mm
STK433-890N-E
80W × 4ch
50W × 4ch
±54V
±47V
±34V
78.0mm×44.1mm×9.0mm
Any and all SANYO Semiconductor Co.,Ltd. products described or contained herein are, with regard to
"standard application", intended for the use as general electronics equipment. The products mentioned herein
shall not be intended for use for any "special application" (medical equipment whose purpose is to sustain life,
aerospace instrument, nuclear control device, burning appliances, transportation machine, traffic signal system,
safety equipment etc.) that shall require extremely high level of reliability and can directly threaten human lives
in case of failure or malfunction of the product or may cause harm to human bodies, nor shall they grant any
guarantee thereof. If you should intend to use our products for new introduction or other application different
from current conditions on the usage of automotive device, communication device, office equipment, industrial
equipment etc. , please consult with us about usage condition (temperature, operation time etc.) prior to the
intended use. If there is no consultation or inquiry before the intended use, our customer shall be solely
responsible for the use.
Specifications of any and all SANYO Semiconductor Co.,Ltd. products described or contained herein stipulate
the performance, characteristics, and functions of the described products in the independent state, and are not
guarantees of the performance, characteristics, and functions of the described products as mounted in the
customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent
device, the customer should always evaluate and test devices mounted in the customer's products or
equipment.
80112HKPC 018-11-0086 No.A2101-1/11
1 page  
STK433-040N-E
STK433-040N-E/060N-E/130N-E/330N-E PCB PARTS LIST
PCB Name : STK403-000Sr/100Sr/200Sr PCBA
Location No.
(*2) 2ch Amp doesn't mount
parts of ( ) .
RATING
Hybrid IC#1 Pin Position
-
040N-E
R01
R02, R03, (R04)
R05, R06, (R07), R08, R09, (R10)
R11, R12, (R13)
R14, R15, (R16)
R17, R18, (R19)
100Ω, 1W
1kΩ, 1/6W
56KΩ, 1/6W
1.8KΩ, 1/6W
4.7Ω, 1/4W
4.7Ω, 1W
R20, R21, (R22)
0.22Ω, 5W
C01, C02, C03, C23 (*3)
100μF, 100V
C04, C05, (C06)
2.2μF, 50V
C07, C08, (C09)
470pF, 50V
C10, C11, (C12)
3pF, 50V
C13, C14, (C15)
10μF, 10V
C16, C17, (C18)
0.1μF, 50V
C19, C20, (C21)
***pF, 50V
100pF
R34, R35, (R36)
3kΩ, 1/6W
L01, L02, (L03)
3μH
Tr1 VCE ≥ 75V, IC ≥ 1mA
D1 Di
Stand-By
Control
Circuit
R30 (*4)
R31
R32
***kΩ, 1/6W
33kΩ, 1/6W
1kΩ, 1/6W
R33 2kΩ, 1/6W
C32 33μF, 10V
J1, J2, J3, J4, J5, J6, J8, J9
-
J7, JS2, JS3, JS4, JS5, JS7
JS8, JS9
JS6, JS10
-
-
JS1 (R23)
100Ω, 1W
(*1) Capacitor mark “A” side is “ – ” (negative).
(*2) STK433-040N-E/060N-E/130N-E (2ch Amp) doesn't mount parts of (
(*3) Add parts C23 to the other side of PCB.
(*4) Recommended standby circuit is used.
)
Component
STK433-
060N-E
○
○
○
○
○
○
○
○
○ (*1)
○
○
○ (*1)
○
56pF
Short
○
○
○
○ (*4)
○
○
○
○
○
-
○
○
130N-E/
330N-E
N.C.
No.A2101-5/11
5 Page 
STK433-040N-E
SANYO Semiconductor Co.,Ltd. assumes no responsibility for equipment failures that result from using
products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition
ranges, or other parameters) listed in products specifications of any and all SANYO Semiconductor Co.,Ltd.
products described or contained herein.
Regarding monolithic semiconductors, if you should intend to use this IC continuously under high temperature,
high current, high voltage, or drastic temperature change, even if it is used within the range of absolute
maximum ratings or operating conditions, there is a possibility of decrease reliability. Please contact us for a
confirmation.
SANYO Semiconductor Co.,Ltd. strives to supply high-quality high-reliability products, however, any and all
semiconductor products fail or malfunction with some probability. It is possible that these probabilistic failures or
malfunction could give rise to accidents or events that could endanger human lives, trouble that could give rise
to smoke or fire, or accidents that could cause damage to other property. When designing equipment, adopt
safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not
limited to protective circuits and error prevention circuits for safe design, redundant design, and structural
design.
In the event that any or all SANYO Semiconductor Co.,Ltd. products described or contained herein are
controlled under any of applicable local export control laws and regulations, such products may require the
export license from the authorities concerned in accordance with the above law.
No part of this publication may be reproduced or transmitted in any form or by any means, electronic or
mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise,
without the prior written consent of SANYO Semiconductor Co.,Ltd.
Any and all information described or contained herein are subject to change without notice due to
product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the
SANYO Semiconductor Co.,Ltd. product that you intend to use.
Upon using the technical information or products described herein, neither warranty nor license shall be granted
with regard to intellectual property rights or any other rights of SANYO Semiconductor Co.,Ltd. or any third
party. SANYO Semiconductor Co.,Ltd. shall not be liable for any claim or suits with regard to a third party's
intellectual property rights which has resulted from the use of the technical information and products mentioned
above.
This catalog provides information as of August, 2012. Specifications and information herein are subject
to change without notice.
PS No.A2101-11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet STK433-040N-E.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STK433-040N-E | 2ch class-AB Audio Power IC |  ON Semiconductor |
| STK433-040N-E | 2channel class-AB Audio Power IC | Sanyo |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |