|
|
PDF STPS30M80C Data sheet ( Hoja de datos )
| Número de pieza | STPS30M80C | |
| Descripción | Power Schottky rectifier | |
| Fabricantes | STMicroelectronics | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de STPS30M80C (archivo pdf) en la parte inferior de esta página. Total 11 Páginas | ||
|
No Preview Available !
STPS30M80C
Power Schottky rectifier
Features
■ High junction temperature capability
■ Optimized trade-off between leakage current
and forward voltage drop
■ Low leakage current
■ Avalanche capability specified
■ Insulated package TO-220FPAB
– insulated voltage: 2000 V
– package capacitance: 45 pF
Description
This dual diode Schottky rectifier is suited for high
frequency switch mode power supply.
Packaged in TO-220AB, I2PAK, D2PAK and TO-
220FPAB, this device is particularly suited for use
in notebook, game station, LCD TV and desktop
adapters, providing these applications with a
good efficiency at both low and high load.
Table 1. Device summary
Symbol
IF(AV)
VRRM
Tj (max)
VF (typ)
Value
2 x 15 A
80 V
175 °C
0.490 V
A1
A2
K
A2
K
A1
I2PAK
STPS30M80CR
K
K
K
A2
A1
D2PAK
STPS30M80CG-TR
A2
K
A1
TO-220AB
STPS30M80CT
A1
K A2
TO-220FPAB
STPS30M80CFP
Figure 1. Electrical characteristics(a)
VI
"Forward"
I
2 x IO
X
VRRM
VAR VR
IF
IO
IR
X
V
"Reverse"
VTo VF(Io) VF VF(2xIo)
IAR
April 2011
a. VARM and IARM must respect the reverse safe
operating area defined in Figure 13. VAR and IAR are
pulse measurements (tp < 1 µs). VR, IR, VRRM and VF,
are static characteristics
Doc ID 018722 Rev 1
1/11
www.st.com
11
1 page  
STPS30M80C
Characteristics
Figure 12. Forward voltage drop versus
forward current (per diode)
30 IFM(A)
25
Tj = 125 °C
(Maximum values)
20
Tj = 125 °C
15 (Typical values)
10
Tj = 25 °C
(Maximum values)
5
0 VFM(V)
0.0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0
Figure 13. Reverse safe operating area
(tp < 1 µs and Tj < 150 °C)
28.0 Iarm (A)
27.0
Iarm (Varm) 150 °C, 1µs
26.0
25.0
24.0
23.0
22.0
21.0
20.0
Varm (V)
19.0
100 105 110 115 120 125 130 135 140 145 150
Figure 14.
Thermal resistance junction to ambient versus copper surface under tab for D2PAK
80 Rth(j-a)(°C/W)
epoxy printed board copper thickness = 35 µm
70
60 D2PAK
50
40
30
20
10
0
0
SCu(cm2)
5 10 15 20 25 30 35 40
Doc ID 018722 Rev 1
5/11
5 Page 
STPS30M80C
Please Read Carefully:
Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries (“ST”) reserve the
right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any
time, without notice.
All ST products are sold pursuant to ST’s terms and conditions of sale.
Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no
liability whatsoever relating to the choice, selection or use of the ST products and services described herein.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this
document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products
or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such
third party products or services or any intellectual property contained therein.
UNLESS OTHERWISE SET FORTH IN ST’S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED
WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED
WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS
OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT.
UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT
RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING
APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY,
DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE
GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER’S OWN RISK.
Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void
any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any
liability of ST.
ST and the ST logo are trademarks or registered trademarks of ST in various countries.
Information in this document supersedes and replaces all information previously supplied.
The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners.
© 2011 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Philippines - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
Doc ID 018722 Rev 1
11/11
11 Page | ||
| Páginas | Total 11 Páginas | |
| PDF Descargar | [ Datasheet STPS30M80C.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| STPS30M80C | Power Schottky rectifier | STMicroelectronics |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |