|
|
PDF AXA016A0X3Z Data sheet ( Hoja de datos )
| Número de pieza | AXA016A0X3Z | |
| Descripción | 12V SIP Non-isolated Power Modules | |
| Fabricantes | Lineage Power Corporation | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de AXA016A0X3Z (archivo pdf) en la parte inferior de esta página. Total 19 Páginas | ||
|
No Preview Available !
Data Sheet
August 20, 2008
www.DataSheet4U.com
Austin SuperLynxTM 12V SIP Non-isolated Power Modules:
10Vdc – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 16A Output Current
RoHS Compliant
Features
Compliant to RoHS EU Directive 2002/95/EC (-Z
versions)
Compliant to ROHS EU Directive 2002/95/EC with
lead solder exemption (non-Z versions)
Delivers up to 16A output current
High efficiency – 92% at 3.3V full load (VIN = 12.0V)
Small size and low profile:
50.8 mm x 12.7 mm x 8.10 mm
(2.00 in x 0.50 in x 0.32 in)
Low output ripple and noise
Applications
Distributed power architectures
Intermediate bus voltage applications
Telecommunications equipment
Servers and storage applications
Networking equipment
Enterprise Networks
Latest generation IC’s (DSP, FPGA, ASIC)
and Microprocessor powered applications
High Reliability:
Calculated MTBF = 4.4M hours at 25oC Full-load
Constant switching frequency (300 kHz)
Output voltage programmable from 0.75 Vdc to
5.5Vdc via external resistor
Line Regulation: 0.3% (typical)
Load Regulation: 0.4% (typical)
Temperature Regulation: 0.4 % (typical)
Remote On/Off
Remote Sense
Output overcurrent protection (non-latching)
Wide operating temperature range (-40°C to 85°C)
UL* 60950-1Recognized, CSA† C22.2 No. 60950-1-
03 Certified, and VDE‡ 0805:2001-12 (EN60950-1)
Licensed
ISO** 9001 and ISO 14001 certified manufacturing
facilities
Description
Austin SuperLynxTM 12V SIP power modules are non-isolated dc-dc converters that can deliver up to 16A of output
current with full load efficiency of 92% at 3.3V output. These modules provide a precisely regulated output voltage
ranging from 0.75Vdc to 5.5Vdc, programmable via an external resistor over a wide range of input voltage (VIN = 10
– 14Vdc). Their open-frame construction and small footprint enable designers to develop cost- and space-efficient
solutions. Standard features include remote On/Off, remote sense, output voltage adjustment, overcurrent and
overtemperature protection.
* UL is a registered trademark of Underwriters Laboratories, Inc.
† CSA is a registered trademark of Canadian Standards Association.
‡ VDE is a trademark of Verband Deutscher Elektrotechniker e.V.
** ISO is a registered trademark of the International Organization of Standards
Document No: DS03-092 ver 1.62
PDF name: austin_superlynx_sip_12v_ds.pdf
1 page  
Data Sheet
August 20, 2008
Austin SuperLynxTM 12V SIP Non-isolated Power Modules:
10 – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 16A wowuwt.pDuattaSchuererte4Un.tcom
Feature Specifications
Unless otherwise indicated, specifications apply over all operating input voltage, resistive load, and temperature
conditions. See Feature Descriptions for additional information.
Parameter
Remote On/Off Signal interface
(VIN=VIN, min to VIN, max; Open collector pnp or equivalent
Compatible, Von/off signal referenced to GND
See feature description section)
Logic High (On/Off Voltage pin open - Module ON)
Von/Off
Ion/Off
Logic Low (Von/Off ≤ 0.3V – Module OFF)
Von/Off
Ion/off
Turn-On Delay and Rise Times
(IO=IO, max , VIN = VIN, nom, TA = 25 oC, )
Case 1: On/Off input is set to Logic Low (Module
ON) and then input power is applied (delay from
instant at which VIN =VIN, min until Vo=10% of Vo,set)
Case 2: Input power is applied for at least one second
and then the On/Off input is set to logic Low (delay from
instant at which Von/Off=0.3V until Vo=10% of Vo, set)
Output voltage Rise time (time for Vo to rise from 10%
of Vo,set to 90% of Vo, set)
Output voltage overshoot – Startup
IO= IO, max; VIN = 10 to 14Vdc, TA = 25 oC
Remote Sense Range
Overtemperature Protection
(See Thermal Consideration section)
Input Undervoltage Lockout
Turn-on Threshold
Turn-off Threshold
Device
All
All
All
All
All
All
All
All
All
All
Symbol
VIH
IIH
VIL
IIL
Tdelay
Tdelay
Trise
Tref
Min
―
―
―
―
―
―
―
―
⎯
Typ
―
―
―
―
3
3
4
―
―
125
8.2
8.0
Max Unit
VIN V
10 μA
0.3 V
1 mA
― msec
― msec
6 msec
1 % VO, set
0.5
⎯ °C
V
V
LINEAGE POWER
5
5 Page 
Data Sheet
August 20, 2008
Austin SuperLynxTM 12V SIP Non-isolated Powwewrw.MDaotadSuhleeest4:U.com
10 – 14Vdc Input; 0.75Vdc to 5.5Vdc Output; 16A output current
Design Considerations (continued)
Output Filtering
The Austin SuperLynxTM 12V SIP module is designed for
low output ripple voltage and will meet the maximum
output ripple specification with 1 µF ceramic and 10 µF
tantalum capacitors at the output of the module.
However, additional output filtering may be required by
the system designer for a number of reasons. First, there
may be a need to further reduce the output ripple and
noise of the module. Second, the dynamic response
characteristics may need to be customized to a particular
load step change.
To reduce the output ripple and improve the dynamic
response to a step load change, additional capacitance at
the output can be used. Low ESR polymer and ceramic
capacitors are recommended to improve the dynamic
response of the module. For stable operation of the
module, limit the capacitance to less than the maximum
output capacitance as specified in the electrical
specification table.
Safety Considerations
For safety agency approval the power module must be
installed in compliance with the spacing and separation
requirements of the end-use safety agency standards,
i.e., UL 60950-1, CSA C22.2 No. 60950-1-03, and VDE
0850:2001-12 (EN60950-1) Licensed.
For the converter output to be considered meeting the
requirements of safety extra-low voltage (SELV), the
input must meet SELV requirements. The power module
has extra-low voltage (ELV) outputs when all inputs are
ELV.
The input to these units is to be provided with a fast-
acting fuse with a maximum rating of 6A in the positive
input lead.
LINEAGE POWER
11
11 Page | ||
| Páginas | Total 19 Páginas | |
| PDF Descargar | [ Datasheet AXA016A0X3Z.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| AXA016A0X3 | 12V SIP Non-isolated Power Modules | Lineage Power Corporation |
| AXA016A0X3Z | 12V SIP Non-isolated Power Modules | Lineage Power Corporation |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |