|
|
PDF MAX2065 Data sheet ( Hoja de datos )
| Número de pieza | MAX2065 | |
| Descripción | Serial/ Parallel-Controlled Analog/Digital VGA | |
| Fabricantes | Maxim Integrated Products | |
| Logotipo |  |
|
Hay una vista previa y un enlace de descarga de MAX2065 (archivo pdf) en la parte inferior de esta página. Total 27 Páginas | ||
|
No Preview Available !
19-3131; Rev 0; 3/08
50MHz to 1000MHz High-Linearity, Serial/
Parallel-Controlled Analog/Digital VGA
General Description
The MAX2065 high-linearity, analog/digital variable-
gain amplifier (VGA) is designed to operate in the
50MHz to 1000MHz frequency range with two indepen-
dent attenuators (see the Typical Application Circuit).
The digital attenuator is controlled as a slave peripheral
using either the SPI™-compatible interface or a parallel
bus with 31dB total adjustment range in 1dB steps. An
added feature allows “rapid-fire” gain selection
between each of four steps, preprogrammed by the
www.DuastaeSrhteherto4uUg.chomthe SPI-compatible interface. The 2-pin
control allows the user to quickly access any one of
four customized attenuation states without reprogram-
ming the SPI bus. The analog attenuator is controlled
using an external voltage or through the SPI-compatible
interface using an on-chip 8-bit DAC.
Because each of the three stages has its own RF input
and RF output, this component can be configured to
either optimize NF (amplifier configured first), OIP3 (ampli-
fier last), or a compromise of NF and OIP3. The device’s
performance features include 22dB amplifier gain (ampli-
fier only), 6.5dB NF at maximum gain (includes attenuator
insertion losses), and a high OIP3 level of +42dBm. Each
of these features makes the MAX2065 an ideal VGA for
numerous receiver and transmitter applications.
In addition, the MAX2065 operates from a single +5V
supply with full performance, or a single +3.3V supply
with slightly reduced performance, and has an
adjustable bias to trade current consumption for linearity
performance. This device is available in a compact 40-
pin thin QFN package (6mm x 6mm) with an exposed
pad. Electrical performance is guaranteed over the
extended temperature range (TC = -40°C to +85°C).
Applications
IF and RF Gain Stages
Temperature Compensation Circuits
Cellular Band WCDMA and cdma2000® Base
Stations
GSM 850/GSM 900 EDGE Base Stations
WiMAX and LTE Base Stations and Customer
Premise Equipment
Fixed Broadband Wireless Access
Wireless Local Loop
Military Systems
Video-on-Demand (VOD) and DOCSIS®-
Compliant EDGE QAM Modulation
Cable Modem Termination Systems (CMTS)
SPI is a trademark of Motorola, Inc.
Features
♦ 50MHz to 1000MHz RF Frequency Range
♦ Pin-Compatible Family Includes:
MAX2066 (Digital VGA)
MAX2067 (Analog VGA)
♦ +19.4dB (Typ) Maximum Gain
♦ 0.5dB Gain Flatness Over 100MHz Bandwidth
♦ 62dB Gain Range (31dB Analog + 31dB Digital)
♦ Built-in DAC for Analog Attenuation Control
♦ Supports Four “Rapid-Fire” Preprogrammed
Attenuator States
Quickly Access Any One of Four Customized
Attenuation States Without Reprogramming
the SPI Bus
Ideal for Fast-Attack, High-Level Blocker Protection
Prevents ADC Overdrive Condition
♦ Excellent Linearity (Configured with Amplifier
Last)
+42dBm OIP3
+63dBm OIP2
+19dBm Output 1dB Compression Point
-67dBc HD2
-83dBc HD3
♦ 6.5dB Typical Noise Figure (NF)
♦ Fast, 25ns Digital Switching
♦ Very Low Digital VGA Amplitude Overshoot/
Undershoot
♦ Single +5V Supply (Optional +3.3V Operation)
♦ External Current-Setting Resistors Provide Option
for Operating Device in Reduced-Power/
Reduced-Performance Mode
Ordering Information
PART
TEMP RANGE
PIN-
PACKAGE
MAX2065ETL+ -40°C to +85°C 40 Thin QFN-EP*
MAX2065ETL+T -40°C to +85°C 40 Thin QFN-EP*
+Denotes a lead-free package.
*EP = Exposed pad.
T = Tape and reel.
PKG
CODE
T4066-3
T4066-3
Pin Configuration appears at end of data sheet.
cdma2000 is a registered trademark of Telecommunications
Industry Association.
DOCSIS and CableLabs are registered trademarks of Cable
Television Laboratories, Inc. (CableLabs®).
________________________________________________________________ Maxim Integrated Products 1
For pricing, delivery, and ordering information, please contact Maxim Direct at 1-888-629-4642,
or visit Maxim’s website at www.maxim-ic.com.
1 page  
50MHz to 1000MHz High-Linearity, Serial/
Parallel-Controlled Analog/Digital VGA
+5V SUPPLY AC ELECTRICAL CHARACTERISTICS (continued)
(Typical Application Circuit, VCC = +4.75 to +5.25V, HC mode with each attenuator set for maximum gain, 50MHz ≤ fRF ≤ 1000MHz,
TC = -40°C to +85°C. Typical values are at VCC = +5.0V, HC mode, PIN = -20dBm, fRF = 200MHz, and TC = +25oC, unless otherwise
noted.) (Note 5)
PARAMETER
SYMBOL
CONDITIONS
MIN TYP MAX
Analog Control Input Impedance
80
Input Return Loss
50Ω source
22
Output Return Loss
50Ω load
22
D/A CONVERTER
www.DataSheet4U.com
Number of Bits
8
Output Voltage
DAC code = 00000000
DAC code = 11111111
0.25
2.75
SERIAL PERIPHERAL INTERFACE (SPI)
Maximum Clock Speed
fCLK
20
Data-to-Clock Setup Time
Data-to-Clock Hold Time
Clock-to-CS Setup Time
CS Positive Pulse Width
CS Setup Time
tCS
tCH
tES
tEW
tEWS
2
2.5
3
7
3.5
Clock Pulse Width
tCW
5
Note 5: All limits include external component losses. Output measurements are performed at RF output port of the Typical
Application Circuit.
Note 6: Operating outside this range is possible, but with degraded performance of some parameters.
Note 7: Guaranteed by design and characterization.
Note 8: It is advisable not to operate continuously the VGA RF input above +15dBm.
UNITS
kΩ
dB
dB
Bits
V
MHz
ns
ns
ns
ns
ns
ns
_______________________________________________________________________________________ 5
5 Page 
50MHz to 1000MHz High-Linearity, Serial/
Parallel-Controlled Analog/Digital VGA
Typical Operating Characteristics (continued)
(VCC = +5.0V, attenuator only, maximum gain, PIN = -20dBm and TC = +25°C, unless otherwise noted.)
0
-1
www.DataSheet4U.com -2
GAIN vs. RF FREQUENCY
(DIGITAL ATTENUATOR ONLY)
MAXIMUM GAIN SETTING
TC = -40°C
TC = +25°C
-3
-4
-5
50
TC = +85°C
250 450 650 850
RF FREQUENCY (MHz)
1050
GAIN vs. RF FREQUENCY
(ANALOG ATTENUATOR ONLY)
0
MAXIMUM GAIN SETTING
TC = -40°C
-1
GAIN vs. RF FREQUENCY
(DIGITAL ATTENUATOR ONLY)
0
MAXIMUM GAIN SETTING
-1
VCC = 5.25V
-2
-3
VCC = 5.00V
-4 VCC = 4.75V
-5
50
250 450 650 850
RF FREQUENCY (MHz)
1050
GAIN vs. RF FREQUENCY
(ANALOG ATTENUATOR ONLY)
0
MAXIMUM GAIN SETTING
-1
-2
TC = +85°C
-3 TC = +25°C
-4
-2
-3 VCC = 4.75V, 5.00V, 5.25V
-4
-5
50
250 450 650 850
RF FREQUENCY (MHz)
1050
-5
50
250 450 650 850
RF FREQUENCY (MHz)
1050
______________________________________________________________________________________ 11
11 Page | ||
| Páginas | Total 27 Páginas | |
| PDF Descargar | [ Datasheet MAX2065.PDF ] | |
Hoja de datos destacado
| Número de pieza | Descripción | Fabricantes |
| MAX206 | +5V RS-232 Transceivers with 0.1uF External Capacitors |  Maxim Integrated |
| MAX2063 | Serial/Parallel-Controlled Digital VGA | Maxim Integrated Products |
| MAX2064 | Serial/Analog-Controlled VGA | Maxim Integrated |
| MAX2065 | Serial/ Parallel-Controlled Analog/Digital VGA | Maxim Integrated Products |
| Número de pieza | Descripción | Fabricantes |
| SLA6805M | High Voltage 3 phase Motor Driver IC. |
 Sanken |
| SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
 Analog Devices |
|
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
| DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |