|
|
Número de pieza | RP109x | |
Descripción | LOW NOISE 150mA LDO REGULATOR | |
Fabricantes | RICOH electronics | |
Logotipo | ||
Hay una vista previa y un enlace de descarga de RP109x (archivo pdf) en la parte inferior de esta página. Total 30 Páginas | ||
No Preview Available ! RP109x SERIES
LOW NOISE 150mA LDO REGULATOR
NO.EA-204-091013
OUTLINE
The RP109x Series are CMOS-based voltage regulator ICs with high output voltage accuracy, extremely low
supply current, low ON-resistance, and high ripple rejection. Each of these ICs consists of a voltage reference
unit, an error amplifier, a resistor-net for voltage setting, a current limit circuit and a chip enable circuit.
These ICs perform with low dropout voltage and a chip enable function which prolong the battery life.
The line transient response and load transient response of the RP109x Series are excellent, thus these ICs are
very suitable for the power supply for hand-held communication equipment. RP109x Series contributes to the
downsizing of the hand-held equipment because it can use the 0.1μF ceramic capacitor.
In addition to SOT-23-5, SC-88A and DFN1010-4 packages, a 0.8mm square ultra compact DFN(PLP)0808-4
package is also available.
FEATURES
• Supply Current .............................................................Typ. 50μA
• Standby Mode ..............................................................Typ. 0.1μA
• Dropout Voltage............................................................Typ. 0.25V (IOUT=150mA, VOUT=2.5V)
• Ripple Rejection ...........................................................Typ. 75dB (f=1kHz, VOUT=2.5V)
• Temperature-Drift Coefficient of Output Voltage ..........Typ. ±100ppm/°C (VOUT<1.8V)
Typ. ±30ppm/°C (VOUT≥1.8V)
• Line Regulation ............................................................Typ. 0.02%/V
• Output Voltage Accuracy..............................................±1.0%
• Packages......................................................................DFN(PLP)0808-4, DFN1010-4, SC-88A, SOT-23-5
• Input Voltage Range.....................................................1.4V to 5.25V
• Output Voltage..............................................................0.8V to 3.6V (For Standard Voltage, please refer to MARK
INFORMATIONS to be described.)
• Built-in Fold Back Protection Circuit.............................Typ. 40mA (Current at short mode)
• Ceramic capacitors are recommended to be used with this IC .... 0.1μF or more
APPLICATIONS
• Power source for portable communication equipment.
• Power source for electrical appliances such as cameras, VCRs and camcorders.
• Power source for battery-powered equipment.
• Power source for home appliances.
1
1 page RP109x
ELECTRICAL CHARACTERISTICS
• RP109xxxxB/D
VIN=Set VOUT+1V (VOUT>1.5V), VIN=2.5V (VOUT ≤1.5V), IOUT=1mA, CIN=COUT=0.1μF, unless otherwise noted.
The specification in
is checked and guaranteed by design engineering at −40°C≤Topt≤85°C. Topt=25°C
Symbol
Item
Conditions
Min. Typ. Max. Unit
VOUT
Output Voltage
Topt=25°C
−40°C ≤ Topt ≤ 85°C
VOUT ≥ 1.8V
VOUT < 1.8V
VOUT ≥ 1.8V
VOUT < 1.8V
×0.99
−18
×0.985
−50
×1.01
+18
×1.015
+50
V
mV
V
mV
IOUT Output Current
150 mA
ΔVOUT/ΔIOUT Load Regulation
1mA ≤ IOUT ≤ 150mA
5 30 mV
VOUT=0.8V
0.70 1.00
VOUT=0.9V
0.62 0.91
1.0V ≤ VOUT < 1.2V
0.56 0.82
VDIF Dropout Voltage
IOUT=150mA
1.2V ≤ VOUT < 1.4V
1.4V ≤ VOUT < 1.8V
0.47
0.39
0.67
0.54 V
1.8V ≤ VOUT < 2.1V
0.33 0.48
2.1V ≤ VOUT < 2.5V
0.28 0.40
2.5V ≤ VOUT < 3.0V
0.25 0.35
3.0V ≤ VOUT ≤ 3.6V
0.23 0.32
ISS Supply Current
IOUT=0mA
50 70 μA
Istandby Standby Current
VCE=0V
0.1 1.0 μA
ΔVOUT/ΔVIN Line Regulation
Set VOUT+0.5V ≤ VIN ≤ 5.0V
0.02 0.10 %/V
RR Ripple Rejection
VIN Input Voltage∗
f=1kHz, Ripple 0.2Vp-p,
VIN=Set VOUT+1V, IOUT=30mA
75
1.4
dB
5.25 V
ΔVOUT
/ΔTopt
Output Voltage
Temperature Coefficient
−40°C ≤ Topt ≤ 85°C
VOUT < 1.8V
VOUT ≥ 1.8V
±100
±30
ppm
/°C
Ilim Short Current Limit
VOUT=0V
40 mA
IPD CE Pull-down Current
0.3 μA
VCEH
CE Input Voltage "H"
1.0 V
VCEL CE Input Voltage "L"
0.4 V
en Output Noise
BW=10Hz to 100kHz VOUT < 1.8V
VOUT ≥ 1.8V
40×VOUT
20×VOUT
μVrms
RLOW
Low Output Nch Tr. ON VIN=4.0V
Resistance (of D version) VCE=0V
60 Ω
∗) The maximum Input Voltage of the ELECTRICAL CHARACTERISTICS is 5.25V. In case of exceeding this
specification, the IC must be operated on condition that the Input Voltage is up to 5.5V and the total operating
time is within 500hrs.
All of units are tested and specified under load conditions such that Tj≈Topt=25°C except for Output Noise,
Ripple Rejection, Output Voltage Temperature Coefficient.
5
5 Page RP109x
3) Supply Current vs. Input Voltage (C1=0.1μF, C2=0.1μF, Topt=25°C)
60
50
40
30
20
10
0
0
RP109x08xx
12 3 4
Input Voltage VIN (V)
5
100
90
80
70
60
50
40
30
20
10
0
0
RP109x14xx
12 34
Input Voltage VIN (V)
5
120
100
80
60
40
20
0
0
RP109x17xx
1234
Input Voltage VIN (V)
5
140
120
100
80
60
40
20
0
0
RP109x18xx
1 234
Input Voltage VIN (V)
5
120
100
80
60
40
20
0
0
RP109x25xx
1 23 4
Input Voltage VIN (V)
5
120
100
80
60
40
20
0
0
RP109x36xx
1 23 4
Input Voltage VIN (V)
5
11
11 Page |
Páginas | Total 30 Páginas | |
PDF Descargar | [ Datasheet RP109x.PDF ] |
Número de pieza | Descripción | Fabricantes |
RP109x | LOW NOISE 150mA LDO REGULATOR | RICOH electronics |
Número de pieza | Descripción | Fabricantes |
SLA6805M | High Voltage 3 phase Motor Driver IC. |
Sanken |
SDC1742 | 12- and 14-Bit Hybrid Synchro / Resolver-to-Digital Converters. |
Analog Devices |
DataSheet.es es una pagina web que funciona como un repositorio de manuales o hoja de datos de muchos de los productos más populares, |
DataSheet.es | 2020 | Privacy Policy | Contacto | Buscar |